Online ISSN: 2515-8260

Keywords : Split tensile strength (STS)

Analysis on Red Mud Waste in the Field of Construction

Mohit Verma; Hemant Singh Parihar

European Journal of Molecular & Clinical Medicine, 2020, Volume 7, Issue 4, Pages 15-19

Red mud is a waste material generated at aluminum refinery in the whole world. It is produced in alumina production from bauxite in the Bayer procedure. The production of red mud depends on the raw material processed, generally,1-2.5 tons of red mud will be produced from3-5tonsofbauxitetoproduce1ton of alumina. Most alumina refineries have the problem of disposal of red mud as it has high PH and alkaline in nature. The red mud will be prepared as semi-dry or dry material in bauxite mines. The untreated red mudhashigh PH(usually 11-13) that plant developmentwill be difficult and this poses very disturbing &serious environmental issues. After many studies of a research paper, it has been found that the red mud has cementations properties that may use as cementations material.

Replacement of Concrete Cement with MultipurposeMetakolinAndVertiver Fibers in Modern Constructions

Hemant Singh Parihar; Mohit Verma

European Journal of Molecular & Clinical Medicine, 2020, Volume 7, Issue 4, Pages 19-26

Concrete will be much sturdy and multipurpose moldable construction material. It is composed of sand, cement,and aggregate mixed with water. The water &cement together create a mixture that covers the aggregate & sand. The cement sector is the3rdbiggest industrial source of pollution emitting over 500,000 tons per annum of CO2, sulphur dioxide, oxide, and carbon monoxide gas. Researchers all over the world have started giving their best effort on the extension of incomplete supplementation of normal Port-land cement with minerals by naturally occurring, manufactured, or manmade waste. Numerouskindsof pozzolanic materials fly ash, metakaolin, silica fume, blast furnace slag, etc. are at hand that have cementitious properties. Mixing these materials with normal“Portland cement” might enhance the mechanical & cement properties of cement. Now a day, metakaolinutilization will be developing high popularity in incompletecementreplacement because of its fineness in enhancing numerous factors &strengths of concrete &mortars. Well in several types of research it has been seen that further addition of fibers (natural or man-made) increases concretes structural integrity. Fibers are small pieces providing reinforcement and certain other properties; they might be flat or circular. The fiber will be frequently defined by a suited factornamed aspect ratio. The fiber aspect ratio will be fiber length ratio to diameter.

Investigation on the Conversion of Sea Sand into Construction Sand using STS and FA Methods

Hemant Singh Parihar; Deepak Varshney

European Journal of Molecular & Clinical Medicine, 2020, Volume 7, Issue 4, Pages 352-355

The most significant material of construction is concrete. This material has been termed as composite material comprising of fine aggregate, water, coarse aggregate & cement. The term fine-aggregate has been a pre-requisite in huge amount of concrete production. Usually, sand from river has been utilized as fine amount. Because of enhancement in concrete usage in construction domain, the requirement for sand is enhanced rapidly. The confines have been fed on huge scale river mining from beds of river. Hence, the simulation study has been performed on concrete cement robustness by substituting partially sand of sea with sand of river in the form of fine amount. Furthermore, in this contribution, soaked, sea sand and sand that is heated has been utilized. The sand of sea in fine amount has been substituted as per multiples of 25. This manuscript prominently examines the split TS (tensile strength) and CS (compressive strength) of concrete, where sand from sea has been utilized as fine soil that is completely or partially substituted and examined for 28 & 7 days. Also, the concrete conduct by partial substitution of fine amount with sand from sea has also been researched.

Assessment and exploration of waste foundry sand in micro silica blended concrete using STS and CS tests

Deepak Varshney; Hemant Singh Parihar

European Journal of Molecular & Clinical Medicine, 2020, Volume 7, Issue 4, Pages 356-359

The deficiency of sand in the river made a novel interest in the researchers. The contributions regarding sand of river diminishment and requirement for exploitation made scientific management of resources available. Here, the sand from foundry could be utilized in the form of partial substitution of fine components or overall substitutes of fine components and the addition of supplementary to attain divergent concrete properties. The concrete has been substituted with optimal aggregate & micro silica has been substituted partially with foundry sand that is of waste. The STS & CS tests has been performed during 28 & 7 days. The highest strength has been attained at substitution of 15% of sand taken from foundry. When compared with plain cement concrete, blended concrete containing micro silica has exhibited greater improvements.